MEIAO MUMBAI SALES AND SERVICE
DSO5102P Digital Storage Oscilloscope

DSO5102P Digital Storage Oscilloscope

Send Inquiry

DSO5102P Digital Storage Oscilloscope

一、

Product name  ï¼š

DS05102P digital storage oscilloscope

二、

Model :

DS05102P

三、

Quantity :

1 set

四、

Characteristic :

•  1GSa / s real-time sampling rate and 25GSa / s equivalent sampling rate

•  bandwidth100MHz

•  Powerful triggering

• Large screen and user-friendly operation interface

• Integrated USB Host, support U disk storage, USB interface system upgrade

• 7-inch 64K color TFT true color LCD screen, clear and vivid waveform display

• Ultra-thin design, lightweight, easy to carry

五、

Technical parameters :

(1)

Basic parameters :

 

 

1.

Analog Bandwidth:

100MHz

2.

Real-time sampling:

1GSa/s

3.

Equivalent sampling:

25GSa/s

4.

Record length:

40K

5.

Time base range(s/div):

4nS/div-80S/div

6.

Channel delay:

500ps

(2)

Vertical system:

 

1.

AD converter:

8bit resolution ,Two-channel simultaneous acquisition

2.

Vertical sensitivity:

2mV/div~10V/div( at BNC)

3.

Vertical displacement range:

±50V(5V/div),±40V(2V/div~500mV/div),±2V(200mV/div~50mV/div)±400mV(20mV/div~2mV/div)

4.

Rise time(At BNC):

≤3.5ns

5.

DC gain accuracy:

2mV/div~5mV/div±4%(Sampling or averaging)         10mV/div~5V/div±3%(Sampling or averaging)

(3)

Trigger system :

 

1.

Trigger Sensitivity (Edge Trigger Type)

DC:CH1/CH2(Typical values)From DC to 10MHz for a cell, from 10MHz to 100M for the 1.5 cell, from 100MHz to 200MHz for the two cells.

EXT (typ) is 200mV from DC to 40MHz

EXT / 5 (typ) from DC to 40MHz for 1V

AC: Decrease the signal below 10Hz

High-frequency rejection:> 80kHz will attenuate the signal

Low frequency rejection: <150kHZ will attenuate the signal

Noise suppression: Reduces trigger sensitivity

2.

Trigger Level Range:

Internal :(ch1/ch2):From the center of the display±8div   internal(EXT):±1.2V external decay 5(EXT/5):±6V

3.

Trigger Level Accuracy (Typical)

Internal (ch1 / ch2): ± (0.3div × V / div) (within ± 4div from the center of the screen)

4.

When the rise and fall times≥20ns:

External (EXT): ± (6% of the set value + 40mV)

External decay 5 (EXT / 5): ± (6% of setting + 200 mV)

5.

Hold off Range :

100ns-10s